herbalAire Glass Water Tool Adapter

Custom made Ground Borosilicate Glass on Glass (GonG) Adapter for your herbalAire Vaporizer. Now you can have a Pure All Glass connection between your herbalAire vaporizer and a water tool to water condition your vapor. These are very strong and can easily support the weight of your herbalAire.

Using a stainless steel screen inside to filter smaller particles from the air stream, makes this herbalAire Glass Water Tool Adapter easy to use and clean.

Bowl size is the same length as the original herbalAire crucible and inside of bowl is slightly smaller due to the wall thickness of the glass.

Made with borosilicate glass and high quality ground glass joints.

Available in 14mm, 18mm and 24mm versions.

All 18mm versions include roll stops which also act as finger grips to pull the adapter out together with the herbalAire.

SHORTY OPTION:

Shorty version of the herbalAire Water Tool Adapter is the same length overall, but the length of the bowl has been reduced by about half to be more conservative with your herbal blends, also known as micro dosing.

YOU GET THE LATEST VERSION FROM

The herbalAire Water Tool Adapter is The Highest Quality Glass Available for your herbalAire Vaporizer.

Works With:

• All herbalAire Vaporizers
• Ground Dry Herb

herbalAire Glass Water Tool Adapter Includes:

• (1) x herbalAire Glass Water Tool Adapter With A Stainless Steel Screen

herbalAire Glass Water Tool Adapter Instructions:

1. Grind your flowers to a medium – fine consistency, recommended to use our Volcano Grinder
2. Fill the bowl on your herbalAire Glass Water Tool Adapter all the way and very very lightly pack a bit
3. Holding your herbalAire upside down, insert the herbalAire GonG Adapter in to the herbalAire heat port ONLY until resistance is felt and then insert the herbalAire and GonG Adapter into your water tool. DO NOT force the herbalAire Water Tool Adapter in past the resistance point or it will be difficult to remove
4. Turn your herbalAire on and heat to your desired temperature with herbalAire GonG Adapter inserted during warm up
5. Once the herbalAire reaches your selected temperature wait an extra 60 seconds to heat soak your biomass and herbalAire Water Tool Adapter
6. Take a nice long slow inhalation
7. Wait 30 seconds between hits to allow your herbalAire to stabilize
8. Resist the urge to inhale too fast or hard, overwhelming the herbalAire’s heater
9. You can raise the temperature for the last few hits to get the full spectrum from your flowers
10. Bowl is spent when there is no more vapor production
11. Always empty spent bowl while it is still at its hottest, a cool bowl is much harder to empty cleanly

 

Look For The Authorized Logo!

Always look for the Authorized Logo to ensure you are buying a Genuine PhD herbalAire Glass Water Tool Adapter. Don’t take chances with your health, only buy from an Authorized Distributor to ensure you are getting Genuine Authentic PlanetHaze Designs products. The advantage of buying from an authorized distributor is you will always get a Genuine herbalAire Glass Water Tool Adapter. You will also be fully covered by any manufactures warranty and you will receive the best service possible.
Disclaimer: PlanetHaze is not responsible for any damage or personal injury caused by or from using our products. Glass is breakable and sharp, please use accordingly.