DynaVap DynaTec Orion Induction Heater V1
CA $199.95
- USD: US $179.95
0 in stock
DynaVap DynaTec Orion Induction Heater V1 Features:
- High Capacity 1000 mAh Rechargeable Battery
- Heats Your DynaVap In 4-6 Seconds
- The V1 Orion Will Work While Charging
- Up To 50 Heat-Ups On Average
- Works With Both Titanium and Stainless Steel Tips
Free Domestic Shipping On Orders $125+
- Trusted Authorized Distributor
- Lowest Prices
- High Security Payments
DynaVap DynaTec Orion Induction Heater V1
The DynaTec Orion Induction Heater is ready for deployment wherever the need. Enjoy flavorful and consistent vapor with your DynaVap wherever you go! The battery has a capacity of 1000 mAh which is enough for up to 50 heat-ups on average and it works with both titanium and stainless steel tips.
You don’t need to worry about pushing any buttons as the Orion Induction Heater senses when the VapCap is inserted. To operate the battery powered induction heater, just insert the DynaVap VapCap into the chamber until you see the orange light blinking and listen for the click to indicate that it’s heated (or count the blinks if you are zoned out). In just four to six seconds your material will be heated to perfection and you’ll be ready for luxurious, tasty vapor. An automatic shutoff feature limits heating to a maximum of 10 seconds at a time.
The included zippered case also fits not only your Orion but also the USB-C charging cable, the included SnapStash, and has room to safely store your DynaVap VapCaps.
The DynaVap Orion is designed and assembled in USA and comes with a 1-year manufactures warranty.
Differences Between DynaTec Orion v1 and Orion v2:
- DynaVap DynaTec V2 requires a 3 second safety calibration after turning the Orion on. During this 3 second safety calibration, a VapCap should not be inserted. The calibration will not complete until the Orion has been turned on with an empty chamber for 3 seconds.
- Orion V1 has pass through charging. The V2 Orion will not work while charging to prevent unnecessary wear and tear on the battery.
- Clicks per charge have decreased on the V2. In an effort to improve the lifespan of the battery, we have updated the threshold for when the blue low-battery indicator turns on as well as when the device will shut off. On average, with a fully charged battery you should expect to see about 25 clicks until the LED indicator changes to blue and about 40 total clicks until the device shuts off. This will vary depending on your particular usage, as well as how long the battery has been left on the charger.
- Updated enclosure to help prevent cracking or chipping
- Improved button construction to prevent damage
- Upgraded battery circuit to improve reliability and protection
- Thermal protection has been added to prevent damage caused from abusive use and overheating. If the Orion gets too hot, it will shut down and require a cool down period and can then be turned back on. If thermal protection is activated, please wait for the device to cool down, then plug it into the charger to restart.
- Heating profile has been tuned to be slightly less aggressive. This allows for better heating with Ti tips by reducing the likelihood of combustion. It still works great on SS tips.
Visual Differences Between Orion v1 and Orion v2:
- V1 will have the text “DYNATEC.io” written all the way across the side of the heater. V2 will have “DYNATEC.io” smaller and located in the lower right 2/3s of the side of the heater.
The DynaVap DynaTec Orion is so easy to use thanks to an ingenious induction heater design. No more hissing from loud torch lighters, no more looking for a secluded spot in the club so people don’t think you are hitting a crack pipe, no more lighting up the back seat and scaring the poop out of your Uber driver.
DynaVap DynaTec Orion Induction Heater V1 Features:
- High Capacity 1000 mAh Rechargeable Battery
- Heats Your DynaVap In 4-6 Seconds
- Pass Through Charging, The V1 Orion Will Work While Charging
- Up To 50 Heat-Ups On Average
- Works With Both Titanium and Stainless Steel Tips
- A Revised Compact Design For Portability
- Orion Induction Heater Senses When The VapCap Is Inserted
- Includes A Zippered Case
- Size = 112mm x 58mm x 33mm
YOU GET THE LATEST V1 VERSION FROM 
A DYNATEC AUTHORIZED DISTRIBUTOR
⚠ WARNING:
Some DynaVap DynaTec Orion Induction Heaters had manufacturing errors and were made incorrectly. PlanetHaze sells only DynaVap DynaTec Orion Induction Heaters with the corrected manufacturing. Buy with confidence from PlanetHaze.
*** ONLY FROM PlanetHaze ***
Get a Free Authentic Dynavap Fat Mouthpiece with your DynaVap DynaTec Orion Induction Heater. The Dynavap Fat Mouthpiece allows you to directly attach your Dynavap to any bubbler with a 14mm female joint.
Works With:
- All DynaVap VapCaps
- Botanicals, Flowers, Pollen and Extracts
- Extractions Like BHO and Wax With The Optional DynaVap Oil Coil
Dynavap’s lineup of vaporizers and aromatizers are crafted to deliver the best flavors and aromas through sleek mechanical designs, unrivaled airflow and industry leading battery free technology.
PlanetHaze Also Stocks:
DynaVap M 2021 Vaporizer:
DynaVap M 2020 Vaporizer:
DynaVap DynaTec Apollo 2 Induction Heater:
DynaVap DynaTec Apollo 2 Induction Heater
Included in the DynaVap DynaTec Orion Induction Heater V1 Kit:
- (1) x DynaVap DynaTec Orion Induction Heater
- (1) x DynaVap DynaTec Zipper Case
- (1) x DynaVap SnapStash Small
- (1) x USB-C Charging Cable
- (1) x Instruction Manual
- Optional and not included: A USB-A power supply with 5V – 2.1A for wall socket charging. Our XTAR 5V 2.1A Wall Adapter is perfect and highly recommended for charging the Orion
Buy From An Authorized Distributor Like PlanetHaze!
Always Buy From An Authorized Distributor to ensure you are buying a Genuine V1 DynaVap DynaTec Orion Induction Heater. Don’t take chances with your health, only buy from an Authorized Distributor to ensure you are getting Genuine Authentic Dynavap products. The advantage of buying from an authorized distributor is you will always get a Genuine V1 DynaVap DynaTec Orion Induction Heater. You will also be fully covered by any manufactures warranty and you will receive the best service possible.
Disclaimer: PlanetHaze is not responsible for any damage or personal injury caused by or from using our products. Glass is breakable and sharp, please use accordingly.
Check Out More Awesomeness on PlanetHaze
- Dynatec has created something special here. There is no need to press down on the vaporizer while heating. The Intelligent Activation technology will automatically heat the vape when it is inserted. You just plop it into the heater and let it do all of the work.
- To turn the Orion on just click the single button on the Orion quickly 3 times in a row. The DynaVap Cap logo on the top of the Orion will turn green to show the Orion is on.
- Insert the VapCap and the logo will turn orange and start blinking.
- You will know the VapCap is heated when it clicks.
- When you hear the click, it’s time to remove the VapCap from the Orion and enjoy your vape! As soon as you are done using it, place it on the magnet and wait for the cool down click. It’s then ready to be reheated.
- There is an automatic shut off timer, and when it is activated the logo will turn red and the heater will shut off. This helps prevent the VapCap from being permanently damaged, but you may still combust if you heat the VapCap too far past the click.
- Each VapCap is slightly different. As they age, the timing with the click will change. We recommend stopping at the click, but for a denser vapor just go 1-2 seconds past the click on most VapCaps. If you go too far after the click, you will combust.
- Always make sure to let the DynaVap click again before reheating. Waiting for the cool down clicks ensures you won’t immediately combust and / or damage the clicker.
- We recommend cleaning out your VapCap in between sessions. This reduces staining of the oven, and will make deep cleanings easier.
- A green light means the Orion is on and ready to be activated. If the device has a blue logo instead of green, this means it is low on battery. We notice that it tends to happen with about 30% battery capacity remaining. We recommend charging the Orion if you see the light turn blue with a USB-C charger.
- If the logo is red, this means you have reached the auto shut off on the Orion heater. Simply remove the VapCap from the heater in order to restore normal function.
- The battery is dead if the DynaTec logo does not light up at all. Simply charge the device using the USB-C charger and you should be good to use it in a few minutes. We always recommend doing a full charge unless you’re going to put it into storage. If you are going to store it, store it with about 70% battery life left.
- Optional and not included: A USB-A power supply with 5V – 2A for wall socket charging.
Additional information
| Weight | 0.27 kg |
|---|---|
| Dimensions | 8 × 2 × 2 cm |
Only logged in customers who have purchased this product may write a review.
You may also like…
Related products
About PlanetHaze
PlanetHaze is here to provide first class hemp and cannabis vaporizers, accessories and service. We have everything the cannabis connoisseur requires including a wide selection of The Best Vapes On The Planet, extractors, screens, concentrate vapes, grinders, portables, bubblers, pipes, glass adapters and all the accessories needed to give you the best experience. We stock many unique and modern vape accessories as well as all major brands. Need something you don’t see, just ask. Peace and Love PlanetHaze ❤️
Extras
Support
Reviews
There are no reviews yet.